AEG HK633220FB User Manual page 26

26 www.aeg.com
4.6 Power function of the
double ring cooking zone
Power function of the inner ring starts
when the appliance senses the cookware
with a smaller diameter than the inner
ring. Power function of the outer ring
starts when the appliance senses the
cookware with a larger diameter than the
inner ring.
4.7 Power management
The power management divides the
power between two cooking zones in a
pair (see the illustration). The power
function increases the power to the max-
imum level for one cooking zone in the
pair. The power in the second cooking
zone automatically decreases. The heat
setting display for the reduced zone
changes between two levels.
4.8 Timer
Count Down Timer
Use the Count Down Timer to set how
long the cooking zone operates for only
this one time.
Set the Timer after the selection of
the cooking zone.
You can set the heat setting before or af-
ter you set the timer.
• To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
• To activate or change the Timer:
touch
time (
dicator of the cooking zone starts to
flash slow, the time counts down.
or of the timer to set the
00 99
- minutes). When the in-
• To deactivate the Timer: set the
cooking zone with
deactivate the Timer. The remaining
time counts back to
of the cooking zone goes out.
• To see the remaining time: set the
cooking zone with
of the cooking zone starts to flash
quickly. The display shows the remain-
ing time.
When the time comes to an end, the
sound operates and
cooking zone deactivates.
• To stop the sound: touch
Minute Minder
You can use the Timer as a Minute
Minder while the cooking zones do not
operate. Touch . Touch
set the time. When the time comes to an
end, the sound operates and
• To stop the sound: touch
4.9 STOP+GO
The function sets all cooking zones
that operate to the lowest heat setting (
).
When operates, you cannot change
the heat setting.
The function does not stop the timer
function.
• To activate this function touch
The symbol comes on.
• To deactivate this function touch
The heat setting that you set before
comes on.
4.10 Lock
When the cooking zones operate, you
can lock the control panel, but not
prevents an accidental change of the
heat setting.
First set the heat setting.
To start this function touch
bol comes on for 4 seconds.
The Timer stays on.
To stop this function touch
setting that you set before comes on.
When you stop the appliance, you also
stop this function.
and touch to
00
. The indicator
. The indicator
00
flashes. The
or to
00
flashes
.
.
. It
. The sym-
. The heat