Mappy Ulti E508ND Manual page 14

4) First use of
mappy
First, start up your vehicle. (If the device
1
has been used for a long time with the
engine turned off, the vehicle's battery
may be drained.)
Attached the suction cup to the
2
windshield and lock it into its base. For
a stronger hold, clean the glass before
attaching the suction cup.
Place the product on the lower part of
3
its holder. Next, as shown in the
illustration, push the device back into
the car holder.
Connect one end of the car charger to
4
your device and the other end to the
cigarette lighter.
5
Push the lever toward your car's windshield to attach it.
6
Press the power button on the device. When te device turns on, you
are brought to a home screen where you can access various functions.
Warning: Install the car holder where it does not interfere with driving, obstruct the driver's vision,
or deploy the airbags.
Ulti E508ND
13