Web-Based Configuration - Buffalo AirStation Turbo G High Power WLI-TX4-G54HP Quick Setup Manual

Web Based Configuration
Welcome to Web-based Configuration, where changes to the Ethernet
Converter's configuration are made. In Web Based Configuration, you can
change the wireless network the Ethernet Converter is associated with, the
IP address of the Ethernet Converter, and other important settings.
After logging in on the previous pages, you will be greeted by the main
configuration page. This page quickly shows you what network the
Ethernet Converter is connected to as well as allowing you to search for
available networks.
The first step in the Web Based Configuration should be to search for an
available wireless network. To do this, press the Search button in the SSID
(Network Name) table.
NOTE: If the wireless network you are attempting to connect to is not
broadcasting its SSID, you will need to manually enter the SSID into the
SSID field. After it has been manually entered, press the Apply Settings
button.
Press Search to scan for local access points that are broadcasting their
SSID. Select the wireless network that you would like to connect to and
press the Select button. Finally, press Set on the main settings page to ap-
ply your settings.