Buffalo WLI2-PCI-G54 User Manual page 6

3. Configuring Wireless Zero Configuration
Service:
◗ If the Wireless Zero Configuration Service is activated,
Windows will scan for available wireless access points
once the Wireless PCI Adapter is properly installed. If
Windows detects one or more access points, a network-
ing icon appears on the task bar. One or more wireless
networks are available appears as a caption accompany-
ing the icon.
■ Note: If the Wireless Zero Configuration Service is not
functioning, select Start>Control Panel>Administrative
Tools>Services. Select Automatic in the Startup Type
field of Wireless Zero Configuration Service to enable the
Wireless Zero Configuration Service. The default value of
Wireless Zero Configuration Service is Automatic.
◗ Right click the networking icon in the taskbar and se-
lect View Available Wireless Networks to display a list
of available wireless networks. Select an access point
network name or SSID and click the Connect button to
establish a connection. You may need to check the box
indicating you are connecting to an unsecured network.
See Page 7 if you need to enter an SSID network name
or WEP/WPA encryption key.
6
Introduction