Before First Use; Cleaning And Maintenance - Deni 6000 Instructions For Proper Use And Care Manual

6000instructions 3/2/04

BEFORE FIRST USE

1. Wash all parts in warm soapy water.
2. Read all instructions.
USING THE ICE CRUSHER
1. Place the unit on a dry, flat surface. Plug the unit in.
2. Place the ice container firmly into the ice crusher.
3. Check the Ice Crushing Chamber for presence of foreign
4:38 PM Page 2
Protective transparent lid
Ice inlet door
Ice inlet door switch
on/off switch
ice chamber
Ice container
scoop
objects, make sure there are nothing inside the ice crushing
chamber before using.
4. Turn on the motor and let it run for a few seconds.
5. Take off the protective transparent lid.
6. Push up on the ice inlet door switch until the ice cube
falls into chamber.
7. Put the protective transparent lid back into place and
hold into position. Once, the ice cube is crushed repeat,
steps 4-5.
8. When complete, pull out the ice container to retrieve ice.

CLEANING AND MAINTENANCE

Unplug the ice crusher before cleaning it. Never immerse
this appliance into water or any other liquid.
Simply wipe the ice crusher exterior with a damp cloth.
Wash ice container and scoop with warm soapy water
avoid the use of abrasive or steel wool.
If crushing flavored ice cubes, the crushing chamber can be
leaned by crushing plain ice cubes, until clean. Do not
attempt to clean the ice chamber with hands. The ice cham-
ber houses the crushing blades. Use extreme caution.
Do not disassemble the unit for cleaning purposes.
All parts should be thoroughly dried before storing away.
Cord storage is located beneath the base.
®
2