Advertisement
IMPORTANT SAFEGUARDS
When using this electrical appliance, safety precautions
should always be observed, including the following:
I
Read all of the instructions before using.
I
Close adult supervision must be provided when this
appliance is used by or near children.
I
Using attachments not recommended or sold by Keystone
Manufacturing Co., Inc. may cause hazards.
I
DO NOT allow the cord to hang over the edge of the
counter or touch hot surfaces.
I
Place the Deni Buffet Server securely in the center of the
counter or work space.
I
Do place near hot gas or electric burner.
I
Do not touch hot surfaces.
I
Turn the thermostat to the OFF position before plugging
in or unplugging.
I
To disconnect, remove plug from wall outlet.
I
CAUTION: The surface will remain warm after the unit is
turned off.
I
Always unplug the unit before attempting to move it.
Extreme caution must be used when moving
appliances containing hot oil or other hot liquids.
I
DO NOT operate with a damaged cord. Return the
appliance to Keystone Manufacturing Company Inc.
for proper service, replacement or repair immediately.
I
Always unplug before cleaning and removing parts.
1
I
Allow to cool before putting on or taking off parts.
I
Always clean each part individually.
I
Do not use outdoors.
I
Do not use the Deni Buffet Server for other than intended
use.
I
Do not clean with metal scrubbing pads. Pieces can break
off the pad and short circuit the electrical parts, creating
the possibility of an electrical shock.
I
To protect against electrical shock, do not immerse plug,
cord, or motor base in water or any other liquids.
I
It is recommended that you do not use an extension cord
with this unit. However, if one is used, it must have a
rating equal to or exceeding the rating of the appliance.
I
DO NOT leave this appliance unattended while in
operation.
I
Do not fill trays more than
I
This unit is for household use only.
I
This appliance is supplied with a molded 3 prong
grounding-type plug and should be used in combination
with a properly connected grounding-type outlet. If a
grounding-type outlet is not available, an adapter may be
obtained so that a 2 slot wall outlet can be used with a 3
prong plug. The adapter must be grounded by attaching
its grounding lug under the screw of the outlet cover plate.
SAVE THESE INSTRUCTIONS
2 /3
full.
Advertisement
