Page 1
Owner's Manual Professional Amplifier CLIP CLIP SIGNAL SIGNAL POWER CLIP CLIP SIGNAL SIGNAL POWER This manual does not contain all the information about the design, production, and changes of the equipment, and does not cover all the conditions that may occur during the installation, use and maintenance.
IMPORTANT SAFETY INSTRUCTIONS 1、The equipment can only be inserted in the power outlet that is indicated by the manual.Otherwise it may cause fire or electric shock. 2、Do not place the container with liquid or small metal objects on the equipment. Otherwise, the liquid or metal falling into the equipment may cause fire or electric shock.
Page 4
PROFESSIONAL POWER AMPLIFIER 1 Preface Thank you for your trust, buy our class D power amplifier! Our company focuses on class D power amplifier. The high level of R&D team, experienced production team and high-quality technical support team ensure that our products used in a variety of environment are stable and reliable, and bring you a pleasant experience.
* Saving energy, reducing operating costs * Environmental protection Aluminum, copper and steel are greatly reduced, saving energy and resources; reduce transportation emissions 70%. Climate warming is a challenge to the world, energy saving and emission reduction are effective measures to solve the climate. We are committed to providing environmental friendly products.
PROFESSIONAL POWER AMPLIFIER 3.3 Installation preparation Warning: before installation, please confirm that you see and read the safety warning. Before installation, make sure that the power cord is not connected to the power outlet; The power switch is turned off; The volume knob is completely closed (counter clockwise to the limit).
The power cord must have sufficient current capacity, AC power supply voltage and frequency must be in range of ±10% of the nominal value. 3.6 Input / output line Common knowledge: Try to use the shielded wire, the higher density shielding layer is the better. Try to select balance connection for input, to reduce noise interference.
PROFESSIONAL POWER AMPLIFIER 3.62 Bridge mode A PRODUCT OF CH-D CH-C/D CH-B CH-A/B QPRO TECHNOLOGY GERMANY SUNON SUNON SUNON SUNON P M D1204P Q B X-A P M D1204P Q B X-A P M D1204P Q B X-A P M D1204P Q B X-A (2).B2220.
3.63 Mono mode A PRODUCT OF CH-D CH-C/D CH-B CH-A/B QPRO TECHNOLOGY GERMANY SUNON SUNON SUNON SUNON P M D1204P Q B X-A P M D1204P Q B X-A P M D1204P Q B X-A P M D1204P Q B X-A (2).B2220.
PROFESSIONAL POWER AMPLIFIER Improper wiring will lead to the equipment can not work properly. For information about connection and configuration, please refer to the “installation” section of this manual. 2、Be careful when connecting, selecting the input signal and controlling the output level. This can avoid unnecessary trouble.
The user can set the power amplifier's sensitivity through the switch on the back panel, so as to match with the third party devices. 29dB, 32dB,35dB, 38dB,41dB are selectable. Input signal: 1kHz sine wave, Amplitude value is RMS. GAIN(dB) QLP 18K4 QLP 12K4 3.17V 3.18V 2.25V...
Page 14
PROFESSIONAL POWER AMPLIFIER Warranty applies only to new products within the warranty period. This warranty does not cover following cases: damages due to improper use, accident; losses be insured by the insurance contract; serial number to be defaced, modified or erased; damages caused by improper transport packaging;...