Wireless Zero Configuration - Buffalo WLI-U2-AG108HP User Manual

Wireless Zero Configuration

. Using Wireless Zero Configuration:
Normally, Windows XP will scan for available wireless
access points once the Wireless Notebook Adapter
is installed. If Windows detects an access point, a
networking icon appears on the task bar. One or more
wireless networks are available appears as a caption
accompanying the icon.
Notes: If Wireless Zero Configuration is not running,
click Start>Control Panel>Administrative Tools>Services.
Select Automatic in the Startup Type field of the Wireless
Zero Configuration Service to start it.
If you don't want to use Wireless Zero Config and
would rather use Buffalo's client utility, or if you have a
Windows 98 or 2000 computer, turn to page 12.
Right click the networking icon in the taskbar and select
View Available Wireless Networks to display a list of
available wireless networks. Select a network and click
Connect.
If the network that you are connecting to is unsecured,
you may need to check the box allowing you to connect
to an unsecured network.
8