Advertisement
Setting Up the Repeater Antenna
1. Connect the repeater
antenna and the A/C
power adaptor that came
with your home system in
the appropriate jacks.
2. If using a home kit,
connect the ministereo
(black connector) to the
jack labeled "LINE OUT"
on the back of the unit.
If your receiver does not
have a built-in modulator or you choose not to use it, connect the red and
white connectors to the input jacks on your home stereo equipment.
3. Place the repeater antenna up to 75 feet away from the transmitter. Try
different orientations until you have the best reception.
Note: See the Delphi XM Satellite Radio Signal Repeater user guide and your satellite radio receiver user
guide for more information. (Go to www.shopdelphi.com to download a copy if you need a new one.)
Using Your Signal Repeater
Delphi XM Roady™
Home Adaptor Kit**
Transmitter
antenna
Delphi XM SKYFi CD
Audio System*
Also for use with Delphi XM SKYFi Audio System*
and Delphi XM SKYFi Home Adaptor Kit.*
Home
antenna
Delphi XM MyFi
Receiver
(in home stand)
The Delphi XM Satellite Radio
Signal Repeater can be used with
any of the satellite radio receiver
products shown—up to 75 feet
away. In fact, one transmitter can
service several receivers by attaching
a repeater antenna to each receiver!
(Additional receiver antennas sold
separately.)
Note: The repeater antenna should be
placed as high as possible for best
reception. For optimal performance, place
the repeater antenna in direct line of sight
with the transmitter.
Note: Any obstructions in direct line of sight
(such as furniture, walls, floors, or people)
may result in degradation of signal.
Caution: Connect only appropriate input
devices to the Delphi XM Satellite Radio
Signal Repeater. Connecting an incorrect
*For use with either SKYFi or SKYFi2.
input device may damage the system
**For use with either Roady or Roady2.
and/or the external electronic device.
Advertisement
