Table of Contents
Advertisement
aus Troubleshooting
Fault
Detergent residue in the ap-
pliance
Water marks on plastic
parts.
Wipeable or water-soluble
coatings are present inside
the appliance or on the door.
Stubborn white coatings are
present on tableware, inside
the appliance or the door.
50
Cause
Lid of the detergent dis-
penser is blocked by items
of tableware parts and will
not open.
The lid of the detergent dis-
penser is blocked by the tab
and will not open.
Tabs are used in the quick
or short programme. Dissolv-
ing time of the tab is not at-
tained.
Washing effect and dissolv-
ing performance are re-
duced after a prolonged
storage time or detergent is
very lumpy.
Due to laws of physics
droplet formation on plastic
surfaces is unavoidable.
After drying water marks are
visible.
Detergent substances are
deposited there. These coat-
ings cannot generally be re-
moved with chemicals.
Detergent substances are
deposited there. These coat-
ings cannot generally be re-
moved with chemicals.
Too little detergent is being
used.
Washing programme selec-
ted too weak.
Troubleshooting
Arrange tableware in the top basket
1.
tableware so the tab collecting tray
is not obstructed by tableware.
→ "Arrange tableware", Page 34
Items of tableware are blocking the
dispenser lid.
Do not place tableware or fra-
2.
grance dispensers in the tablet col-
lecting tray.
Position the tab in the detergent dis-
▶
penser crosswise, not vertically.
Select a more intensive Programme
▶
or use Powder detergent.
Change your "detergent"
▶
→ Page 30.
Select a more intensive pro-
▶
gramme.
Position tableware at an angle.
▶
→ "Arrange tableware", Page 34
Use rinse aid.
▶
→ "Rinse aid", Page 29
Change your "detergent"
▶
→ Page 30.
Clean the appliance mechanically.
▶
Change your "detergent"
▶
→ Page 30.
Clean the appliance mechanically.
▶
Increase the amount of detergent
▶
used or change "Detergent "
→ Page 30.
Select a more intensive washing
▶
programme.
Advertisement
Table of Contents
