Advertisement
Operator's Instructions
Use Ecco genuine parts and accessories only for best
function and safety.
Before starting, read through all instructions carefully.
Principal data
Type
Max. working
pressure
Ecco
bar
40S
7
401S
7
402S
7
Important
WARNING
Do not use halogenated hydrocarbons in coating application
equipment where aluminium or galvanized parts come
in contact with the solvent or coating material.
Halogenated hydrocarbons e.g. 1,1,1-thrichloroethane and
methylene chloride react, violently with such parts, causing
corrosion and danger for explosion.
Paint cup
volume
l
-
1
0.5
WARNING
The high velocity flow of air and liquids through hoses and
nozzles may develop static electricity. Be sure that the
equipment, object being sprayed, spraybooth, paint and
waste container are properly grounded to prevent static
discharge or sparks.
WARNING
As the equipment works under pressure the utmost care must
be observed during the work. Bearing this in mind, never aim
the spray gun at a person or towards any part of the body In
the event of personal injury caused by the spraying pressure,
immediate medical attention is essential. Before carrying out
any adjustment or repair, the equipment must be switched
off and the paint pressure relieved.
5
Advertisement
