Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Elsat Manuals
  4. Rfid Systems
  5. iNode Control ID
  6. Instruction manual

Elsat iNode Control ID Instruction Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
iNode Control ID
Instruction manual
®
© 2014-2016 ELSAT

Advertisement

loading
Need help?

Need help?

Do you have a question about the iNode Control ID and is the answer not in the manual?

Questions and answers

Summary of Contents for Elsat iNode Control ID

  • Page 1 Control ID Instruction manual ® © 2014-2016 ELSAT...
  • Page 2 Bluetooth 4.0 ® and Low Energy Bluetooth enabled ® (Smart Bluetooth ®). iNode Control ID is an intelligent & wireless BT 4.0 ID (RFID System). Intended mainly for the control of security personnel. It can also be used as a so-called electronic key. The authorization method of iNode Control ID identifiers, based on Challenge/Response protocol using AES128 encryption provides a very high degree of security.
  • Page 3 Setup will find all nearby iNode devices and sort them regarding receiving signal strength. Each type of iNode device has a different icon. For iNode Control ID it is the first picture in the first row in the window below.
  • Page 4 Tx power: determine the power the device broadcasts and simultaneously the range the device  can be scanned. If iNode Control Point has set the scan range ~200m, and iNode Control ID has set the broadcast power -2dBm range 33% then effective distance from which the device can be scanned is equal 200m*0,33=66m.
  • Page 5 Control ID access from others PCs or phones. You can reset this protection by battery removing for at least one minute. This type of protection cannot be set in case of iNode Control Point. Connection is password protected: access to the iNode Control ID is password protected. ...
  • Page 6 Control ID – instruction manual ELSAT s.c. The picture below shows the Data tab: Clear data button erases the archived data memory and at the same time enabling archiving data. Data in memory are saved in a cyclical buffer, eg. after it is full, the oldest data will be erased.
  • Page 7 Control ID – instruction manual ELSAT s.c. The picture below shows the Firmware tab: Current firmware version field shows the version and creation date of the firmware in the device. To change the firmware in the device first select New firmware file.

  • Page 8: Battery Replacement

    ELSAT s.c. 3. Battery replacement The CR2032 battery from iNode Control ID should work up to 12 months. So really the speed of consumption depends on many factors such as operating temperature, frequency of collaboration with the PC or Smartphone (reading the recorded data), set the transmit power level, etc.

  • Page 9: Technical Information

    Control ID – instruction manual ELSAT s.c. Technical information Bluetooth Low Energy:  configurable from your PC: ◦ the power with which the device operates in the range of-18 dBm + 8 dBm (maximum range up to 200 m in open space);...
  • Page 10 Control ID – instruction manual ELSAT s.c. Disposal All the packaging materials are recyclable and are labeled as such. Dispose of the packaging in accordance with local regulations. Keep the materials out of children reach, as the materials can pose a hazard.
  • Page 11 Control ID – instruction manual ELSAT s.c. DECLARATION OF CONFORMITY 2/6/2014 (according to ISO/IEC Guide 22) Producer: ELSAT s.c. Address: Warszawska 32E/1, 05-500 Piaseczno k/Warszawy POLAND Declares that the product: iNode Control ID Product: iNode:0x0803 Model: Conforms to the following Product Specifications and Regulations: PN-EN 60950-1:2007/AC:2012 PN-ETSI EN 301 489-1 V1.9.2:2012...