Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Inline SmartHome 40160
Summary of Contents for Inline SmartHome 40160
- Page 1 Art.-No.: 40160/B STAND FAN User manual...
-
Page 2: Content Of Delivery
This user manual applies to the following January 2020 product: CONTENT OF DELIVERY 40160B/40160 InLine® SmartHome Stand Fan black resp. white 1x InLine® SmartHome Stand Fan black resp. white MANUFACTURER 1x user manual DE+EN INTOS ELECTRONIC AG Siemensstraße 11 Please check the content of delivery for D-35394 Gießen... -
Page 3: Intended Use
Amazon Alexa, Google Home INTENDED USE The InLine® SmartHome fan generates a cool airflow through a fast rotating propeller. The control is done either on the device itself or via APP, if a successful integration into the WiFi network has taken place. - Page 4 European Union L 329, page 10 ff. dated 2011/12/13 in Germany. If you in- tend to use this product outside of Germany, please read up in advance on the respective regulations in your host country. OPERATION OF THE INLINE® SMARTHOME FAN PREPARATION •...
- Page 5 Fasten the drive by tightening the screw on the Place the drive with control unit on the telescopic back of the drive. handle. Place the rear protective grille on the drive motor and fasten the grille with the plastic union nut. info@inline-info.com...
- Page 6 Screw the propeller tight with the transparent Push the transparent propeller onto the drive axle. grip screw. (Note! The grip screw is screwed tight Please make sure that the pin on the drive axle fits on left turn / unscrewed on right turn).
-
Page 7: Sleep Mode
(1 hour / 2 hours / 3 hours / 4 hours) is selected. Each time a change is made, the beep sounds and the respective LED lights up blue. OSCILLATION • To switch on automatic oscillation, press the oscillation button. To switch off the oscil- lation, press the button again. Both are also confirmed acoustically. info@inline-info.com... -
Page 8: Operation Via App
OPERATION VIA APP Download the „Smart Life“ APP from the Download the „Smart Life“ APP from Apple Google Play store and launch the APP. APP store and launch the APP. REGISTER AND LOGIN THE APP Open the „Smart Life“ APP on your phone. - Page 9 Select your WLAN network and enter your WLAN password. „Confirm“ to allow the device to connect to your network. The APP now connects to the device, wait until the display of your smartphone confirms this. info@inline-info.com...
- Page 10 After a successful connection the blue status LED stops blinking and now lights up. You can assign your connected device directly to a room, but you can also simply ignore it. The device then appears in the device overview under „All devices“.
-
Page 11: Device Configuration
Name (of the device) Please assign a name which will appear later in the device list, automatisms and scenarios Location (location of the Here you can optionally assign a room name in which the device is device) located info@inline-info.com... -
Page 12: Troubleshooting (Faq)
NO WIFI CONNECTION POSSIBLE Make sure that the router and the device to be connected are turned on. Check the availa- ble WiFi standard of the device. The InLine® Smart Home product supports WiFi 2.4GHz / IEEE802.11b/g/n NETWORK IS FOUND, BUT NO CONNECTION POSSIBLE... -
Page 13: Maintenance And Cleaning
MAINTENANCE AND CLEANING We recommend cleaning the InLine® SmartHome fan with a clamp cloth: Switch off the device and pull out the mains plug. Wipe the fan clean and then dry again. -
Page 14: Any Questions
Changes in the sense of technical progress can be made without prior notice. Our products, including packaging, are not toys; they may contain small parts and sharp objects. Keep away from children, please. INTOS ELECTRONIC AG • Siemensstrasse 11 • D-35394 Giessen • www.inline-info.com...
Need help?
Do you have a question about the SmartHome 40160 and is the answer not in the manual?
Questions and answers