Buffalo LinkStation Pro Duo LS-WTGL/R1 User Manual page 25

Network (Workgroup/Domain)
from the domain controller(s). To configure the LinkStation Pro on an Active Directory network, you must
have the Domain Administrator login credentials. Enter the Domain Name and Domain Controller into the
appropriate fields. In an Active Directory environment, check the Active Directory Domain checkbox and fill
in the remaining fields. The Authentication Setup fields will be automatically filled out, so no input is needed
there. Once you have finished, press Apply.
If you are unfamiliar with Domain/Active Directory
networking, then please leave the Network Type selected as
Workgroup and Workgroup Name set to Workgroup.
To make your LinkStation a member of a workgroup or
an NT domain, enter the appropriate information into the
fields on this page and click Apply.
If using NT Domain or Active Directory, LinkStation must be
added as a member computer in the Domain Server.
Setting NT Domain or Active Directory for network type
integrates the LinkStation with a server. The LinkStation
Pro participates as a member device in the Domain and
Active Directory networks, allowing the LinkStation to use
Users and Groups that reside on the Domain or Active
Directory System. If Active Directory is used, then the
LinkStation will automatically receive update information

Advanced Settings