Before Using For The First Time; Selecting Extraction Mode Or Recirculation Mode; Setting Up Miele@Home - Miele DA 3568 Operating And Installation Instructions

Selecting extraction mode or
recirculation mode
The cooker hood is suitable for both
extraction mode and recirculation
mode. The power of the fan is
adapted to suit the selected operating
mode. The cooker hood is delivered
set up for recirculation mode. It has to
be reset for extraction mode.
To reset it for extraction mode, the
operating hours counter for the
charcoal filter(s) has to be deactivated.
 Switch off the fan and the lighting.
 Press the  sensor control and the
operating hours sensor control 
at the same time.
The charcoal filter symbol  and one of
the fan power levels will flash.
 Press and hold the  sensor control
until the B indicator starts to flash.
 Confirm your choice with the
operating hours sensor control .
All the indicator lights will go out.
Extraction mode has now been set.
If you do not confirm your selection
within 4 minutes, the cooker hood will
automatically revert to the original
setting.

Before using for the first time

Setting up Miele@home

Requirements:
- A WiFi network
- The Miele app
- A Miele user account. The user
account can be created via the
Miele app.
Your cooker hood is equipped with an
integrated WiFi module. Connect the
cooker hood to your household WiFi
network. You will then be able to
operate the cooker hood via the Miele
app.
If your Miele hob is connected to a
home WiFi network, you can control the
cooker hood automatically via the
Con@ctivity function.
Before installing the cooker hood in
its final location, ensure that the
signal of your WiFi network is strong
enough.
You can connect to the household WiFi
network via the Miele app or via WPS.
17