Summary of Contents for Schako DISA-W
- Page 1 Installation, Mounting and Maintenance DISA-W Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63 - 980 - 0 Fax +49 (0) 74 63 - 980 - 200 info@schako.de www.schako.de...
-
Page 2: Table Of Contents
Installation, Mounting and Maintenance DISA-W Contents Safety instructions ..........................3 General information ................................... 3 Warranty ............................3 Recycling ............................3 General information ..........................4 Identification of the delivered model ............................4 Function ..................................... 4 Installation and commissioning ........................ 5 Operating conditions .................................. 5 Material reception .................................. -
Page 3: Safety Instructions
- Do not change any control or safety elements without pri- or approval by the manufacturer or the local sales office. SCHAKO shall not give any warranty for damage resulting from: - Improper use caused by ignoring the instructions given in this manual - Non-observance of the operating conditions of the device. -
Page 4: General Information
Identification of the delivered model draulic connection to the registers can be established either on The wall induction diffuster type DISA-W is available in four dif- the left-hand (-WS1) or right-hand side (-WS2) of the unit. Con- ferent nozzle configurations: A, B, C und D, and different device nections seen in air flow direction. -
Page 5: Installation And Commissioning
The unit shall only be held in position or moved by holding on to the housing. The weight must not rest on the water connections. SCHAKO cannot be held liable for damage to the unit caused by improper handling or handling not mentioned here, loading or unloading. -
Page 6: Installation
Installation, Mounting and Maintenance DISA-W Installation The wall induction diffuser type DISA-W is suitable for vertical installation in a wall or ceiling panelling. The devices must not be installed in places with extreme moisture (e.g. laundries or swimming pools), aggressive media, with high dust formation, outdoors or in places subject to explosion hazards. -
Page 7: Hydraulic Connections
Please note that the use of an antifreeze necessarily results in a loss in performance of the register. The wall induction diffusers type DISA-W are induc- tion devices for "dry cooling". To avoid condensation, the cold water supply tem-... -
Page 8: Mounting Accessories
Installation, Mounting and Maintenance DISA-W Mounting accessories Adjustment of the air deflection blades Valves and actuators To regulate the air flow, rotate the air deflection blades manual- Valves and actuators shall not be installed ex works. During in- stallation the manufacturer's specifications must be observed. -
Page 9: Maintenance
- Please do not use any scouring agents for cleaning since ment, in order to avoid cuts and other injuries these materials may impair or damage the DISA-W (gal- produced by sharp and pointed parts. vanised steel, aluminium and copper) and the surface coatings (paints and anodised surfaces). -
Page 10: Checking The Primary Volumetric Flow
Installation, Mounting and Maintenance DISA-W Checking the primary volumetric flow The supplied primary volumetric flow can be simply checked by checking the static pressure with a Pa meter and the measuring tube available from us as accessory. To this end, one end of the measuring tube fitted with a rubber... -
Page 11: Troubleshooting
Installation, Mounting and Maintenance DISA-W Nozzle configuration C Nozzle configuration D ' P (Pa.) ' P (Pa.) 3000-C 2100-D 2400-D 2700-D 3000-D 0 20 40 60 80 100 Vzu (m 0 20 40 60 80 100 Vzu (m Troubleshooting Problem... - Page 12 Installation, Mounting and Maintenance DISA-W Version: 20.10.2015 Z11/27 - 12 Construction subject to change. No return possible!
Need help?
Do you have a question about the DISA-W and is the answer not in the manual?
Questions and answers