Advertisement
2. ASSEMBLY GUIDE (BACK COVER)
1) Place the B/C on the Module Assy and push the Holder Position
2) Check the Upper/Left/Right Side gap to make sure the the holder is assembled correctly. → If the Holder is not assembled, B/C
is opened and easily recognized.
3) Assemble the Screw of B/C.
Screw : 12 point
Holder : 65/55" 8 point, 49" 6 point
4) Assemble Stand Screw 4 EA.
65/55"
- 16 -
Copyright ©
LG Electronics Inc. All rights reserved.
Only for training and service purposes.
49"
Screw : 4ea
Advertisement
