Related Manuals for Beast 500009
Summary of Contents for Beast 500009
- Page 1 □ 500009 10ft x 17ft 800006 REV003 For Customer Service, please call 1-800-487-0115 Monday - Friday 9:00AM - 5:00PM Central Time Beast Inc.
- Page 2 Physical Activity and Social Interaction through the Creation of Innovative and Appealing Designs. We believe you will love your Beast Trampoline and we would love an honest review if you purchased it from Amazon. We would also love a follow on Instagram @beast_trampoline_official or a tag with hashtag #beasttrampoline.
-
Page 3: Guidelines For Safe Use
However, please bear in mind that children have a natural urge to play and that this may lead to unforeseen dangerous situations for which the Beast Inc. cannot be held responsible. Teach your children how to use the product and point out possible dangers to them. -
Page 4: General Safety Instructions
3.0 General Safety Instructions Please read and follow all instructions before you start using your Beast Trampoline. Please inspect the Trampoline before each use for any defects such as a torn mat, loose or broken springs and overall stability of the trampoline. -
Page 5: Trampoline Assembly
5.0 TRAMPOLINE ASSEMBLY STEP BY STEP CONSTRUCTION Please read the assembly instructions before beginning to assemble the product. Please refer to the table below for parts description and numbering. Make sure you have all the parts listed. If you are missing any parts, please contact the place of purchase. - Page 6 Parts list FRAME LEG LEG TO ARM BRACKET FRAME ARM SHORT SIDE FRAME ARM LONG SIDE FRAME ARM CORNER A FRAME ARM CORNER B LARGE SPRING JUMPING MAT SAFETY PAD BOLT, M8 X 65MM NUT, M8 UPPER TUBE WITH FOAM LOWER TUBE WITH FOAM SLEEVE POLE CAP...
- Page 7 Parts list...
- Page 8 Step 1 Note: Item 2 may require a mallet secure to item 5. Item 5 will have 15 holes facing up. Step 2 Note: Item 2 may require a mallet secure to item 6. Item 6 will have 15 holes facing up.
- Page 9 Step 3 Note: Item 3 will have 13 holes facing down. From step 2 From step 1 Step 4 Note: Item 4 will have 19 holes facing down. From step 3 From step 3 10 (8x) 11 (8x)
- Page 10 Step 5 Note: Long hook on the item 7 (124x) connects to bottom of frame. Face Beast logo up on item 8. 10th...
- Page 11 Step 5 11th 12th 14th 13th 15th 17th 18th 16th...
- Page 12 Step 6 Note: Place item 9 on tramp and connect straps (under item 9) to frame. (14x...
- Page 13 Step 7 Note: Item 15 may require a rubber mallet to assemble onto item 12. Connect loop from item 14 to hook on item 15. 14 (8x) 12 (8x) 13 (8x) 15 (8x) ATTENTION: USE ITEM 13 TO VERIFY THE SIZE OF THE TUBE ON ITEM 2 IN STEP 8.
- Page 14 Step 8 Note: Place item 16 on tramp with door as shown. Zipper item 16 to item 9 (4 zippers). Hook item 16 top loop to enclosure pole from step 7 and lift in place for 8 locations. Strap lower loop on item 16 to item 2 as shown.
- Page 15 You are all done!
-
Page 16: Care And Maintenance
6.0 CARE AND MAINTENANCE This Beast Trampoline was designed and manufactured with quality materials and craftsmanship. If proper care and maintenance is provided, it will provide all jumpers with years of exercise, fun, and enjoyment as well as reduce the risk of injury. Please follow the guidelines listed below: This Trampoline is designed to withhold a certain amount of weight and use. -
Page 17: Warranty
Beast Inc. during the warranty period. In case of material and construction defects that have been ascertained by Beast Inc., the product or its components will be repaired or replaced – according to its choice – free of charge during the warranty period mentioned above.