Lenovo ThinkPad T14s Gen 2 User Manual page 23

• Change the HDMI standard of the HDMI connector from 2.0 to 1.4. To change the HDMI standard, enter
the UEFI BIOS menu (see "Enter the UEFI BIOS menu" on page 37), and then configure HDMI Mode
Select in the Config menu.
Connect to a wireless display
To use a wireless display, ensure that both your computer and the external display support the Miracast
feature.
Press + and then select a wireless display to connect with.
Set the display mode
Press or
Change display settings
1. Right-click a blank area on the desktop and select Display settings.
2. Select the display that you want to configure.
3. Change display settings of your preference.
You can change the settings for both the computer display and the external display. For example, you can
define which one is the main display and which one is the secondary display. You also can change the
resolution and orientation.
and then select a display mode of your preference.
.
Chapter 2 Get started with your computer
®
17