INTRODUCTION AND PREPARATION NTRODUCTION Thank you for purchasing a Logo Lites® Model A Turn Signal Kit. Your turn signal kit was built to high quality standards to provide you with years of reliable service. This manual should serve as a guide for installing a turn signal kit on your vehicle.
Review all the parts shown in the list below. We strive to make quality products, so no parts should be missing or damaged. However, if a part is missing or damaged, contact Creative Connections, Inc. about your Logo Lites product at the Consumer Hot Line phone number listed on the front page of this manual for immediate response.
Page 4
5. Remove left most gas tank bolt with socket wrench. 6. Insert gas tank bolt through large ring terminal on short black wire. 7. Re-install gas tank bolt to complete chassis connection. 8. The fuse holder must now be installed in the 5’ red wire. Start by cutting about 6” of red Illustration 2: wire off of the 5’...
Identify the Logo Lites product purchased, the date and location of purchase, and the nature of the alleged defect. Do not ship your product back to CCI unless and until specifically directed to do so.