Advertisement
Quick Links
Advertisement
Related Manuals for Bomma soap mini
Summary of Contents for Bomma soap mini
- Page 1 Design by Ota Svoboda bomma...
- Page 3 • The dimensions and weight of glass parts may differ slightly due to manual production. • All Bomma products are made from hand-blown lead-free crystal. Any small bubbles, non-melts and inhomogeneities in the glass are not a reason for complaint. This is a characteristic feature of this traditional craft.
- Page 4 Upon opening, first determine that there was no damage occurred during transport and that the light fixture is complete. Otherwise, please contact your seller immediately, as later claims may not be considered. Assemble the lighting fixture according to the manual, recognizing that its installation wiring may only be carried out by a qualified electrician following general legal regulations.
- Page 5 Shorten the cable to the required length for hanging the pendant light and remove wire insulation according to the diagram. The cable (+) and metal braid (-) will serve as conductors for electrical wiring. metal braid (-) cable (+) inner wire insulation outer wire insulation...
- Page 6 Slip the cable through the canopy and then through the grommet Tighten the adjusting screw to secure the cable. Tighten the adjusting screw gently to avoid cable breaking. Install wiring according to the diagram. Use a 12V DC transformer L, N INPUT OUTPUT...
- Page 7 Move the canopy to the ceiling and attach it to the base-plate using screws. Insert the dimmable light source into the base...
- Page 8 Attach the glass part onto the mounting Congratulations! You may now reconnect the power and turn the light on. When dismantling, first turn off the light and disconnect from the power supply. Then follow the above steps in reverse order. Use the original or similar packaging for possible later transport of the light fixture to prevent damage.
- Page 9 Maintenance • When unpacking, installing and cleaning • We recommend performing the your fixture, handle the individual installation of pendant lights with more components with outmost care, than one person. particularly the glass parts, which are • After installation check whether the light very fragile.
- Page 10 Cleaning Important notice • All cleaning and maintenance must be • The producer bears no responsibility carried out when the power is off, ideally for damage caused by unprofessional entirely disconnected. installation or inappropriate handling • When cleaning, use fine-fabric gloves. of the light fixture, including installation Particularly avoid handling metal- with accessories other than those...
- Page 11 Iron and steel 20 01 01 Paper and cardboard 15 01 05 Composite packaging Contact Bohemia Machine Ltd. 1177 Zámecká St. 58291 Světlá nad Sázavou Czech Republic +420 569 453 149 info@bomma.cz www.bomma.cz Instagram bomma_cz Facebook bommacz bomma.cz Control Date of packaging...
- Page 12 step beyond...
Need help?
Do you have a question about the soap mini and is the answer not in the manual?
Questions and answers