Installation - Deko-light 180040 Manual

Manual
Article No.: 180040
2. Touch-Remote
Dimensions (LxBxH):
Battery:
Distance:
Frequency:

5. Installation

1. Connect Touch-Controller with bulb
a. Switch on the LED Bulb and then push and hold the „ON" button within 1 sec.on the
Touch-Controller, after that the bulb flashes up 3 times, then the Touch-Controller and the
bulb are connected.
b. If this step isn't working please try again.
2. Disconnect Touch-Controller from bulb
Switch on the LED bulb and then push and hold the „ON" button within 1 sec. again
till the bulb flashes up 9 times, then the Touch-Controller and the bulb are disconnected.
Now you can address the bulb again with the same or another Touch-Controller.
110 x 52 x 20 mm
2x AAA batteries
ca. 20 m
2,4 GHz
5
On/Off
Colorwheel
D (dim)
S (speed)
P (program)