Touch-Remote; Master / Slave Function - DekoLight 843025 Manual

Rf color & white remote
Table of Contents

Advertisement

Available languages

Available languages

Manual
Article No.: 843025

9. Touch-Remote

Operation:
Frequency:
Distance:
Dimension (LxWxH):
On/Off Switch:
Program Button "P":
Speed Button "S":
Dim Button "B":
White Button „W":
1. Connect Touch-Controller with RF Controller
1. Switch on the Power of the RF Controller and then push and hold the "ON" button on the Touch-
Controller within 1 sec., after that the connected lamp flashes up 3 times, then the Touch-Controller and
the Controller are connected.
2. If this step isn't working please try again.
2. Disconnect Touch-Controller from RF Controller
1. Switch on the Power of the RF Controller and then push and hold the "ON" button on the Touch-
Controller within 1 sec. till the connected lamp flashes up 9 times, then the Touch-Controller and the RF
Controller are disconnected.
2. Now you can address the RF Controller again with the same or another Touch-Controller.

10. Master / Slave Function

● The control of the light source will be effect via an RF controller and / or via the WiFi app by using a
smartphone or tablet with the WiFi box..
● The signals are sent to the controller via RF or WiFi which acts as a „master controller".
● From the „master controller" the signals are transmitted via a Cat 5 cable to the other controller, these
controllers act as a „slave controller".
● The controller must not be manually configured as master and slave. This is done automatically when the
„master controller" is connected to the RF controller or Wifi app and the „slave controller" by association
with the Cat 5 cable.
● The max. cable length between two controllers may not exceed 100 m.
● With the Master / Slave function, the system can be expanded without the need to have to connect to each
controller manually.
Deko-Light Elektronik-Vertriebs GmbH
www.deko-light.com / deko@deko-light.com
Technische Daten können ohne Vorankündigung geändert werden. Irrtümer vorbehalten. /
Technical Data can be changed without advance notice. Errors excepted.
2x AAA Batterien (excl.)
2,4 GHz
ca. 20 m (inside)
110 x 52 x 20 mm
addressing with "ON"
Change the program
Speed control
Brightness
White Dimmer
On/Off
Color select
Dimmer color
Program select
Speed select
Dimmer white
02.07.2020
6 / 7

Advertisement

Chapters

Table of Contents
loading

Table of Contents