Save Changes And Exit; Discard Changes And Exit; Get Default Values; Load Previous Values - Dell Inspiron 3000 Reference And Troubleshooting Manual

Main System Devices

Save Changes and Exit

Discard Changes and Exit

Get Default Values

Load Previous Values

Save Changes

F1 Help Select Item
ESC Exit Select Menu

Figure 2-6. Exit Menu of Setup Program

Save Changes and Exit
After you have changed a setting in the Setup program,
select this option to save the changes into NVRAM and
exit the Setup program.
If you try to exit the Setup program without saving your
changes, you are prompted to save.
Discard Changes and Exit
Select this option only if you do not want to save the
changes you made in the Setup program.
Get Default Values
Get Default Values lets you select the default settings for
each option in the Setup program. Press <Enter> when
prompted to continue. Then you can make more changes
in the Setup program or select Save Changes and Exit.
Setup Utility
Security Power
F5/F6 Change Values
Enter Execute
Load Previous Values
Load Previous Values lets you discard the settings you
have made and restore the settings you previously saved.
Press <Enter> when prompted to continue.
Save Changes
Save Changes saves your settings without exiting the
Setup program. Press <Enter> when prompted to con-
tinue, and then return to other menus to make changes.
R
Dell provides software utilities and drivers that help you
control certain features of your computer. If Dell installed
Windows 95 on your computer, these utilities and drivers
are also already installed.
Boot Exit
Item Specific Help
F9 Setup Defaults
Command F10 Save and Exit
einstalling Utilities and Drivers
Customizing System Features 2-11