Download Print this page

Larson Electronics IND-MD-DF-ESF SP0104 Series Instruction Manual

Replacement battery for electrostatic sprayers 12v lithium ion

Advertisement

Quick Links

12V Lithium Ion - Sprayer Disassembly Required for Installation
Thank you for your purchase of the Larson Electronics IND-MD-DF-ESF-XX-SP0104.
WARNING:
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
CRITICAL SAFETY INSTRUCTIONS:
INSTALLATION SHOULD ONLY BE CONDUCTED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH NEC AND ANY
RELEVANT LOCAL BUILDING CODES.
RISK OF FIRE OR ELECTRIC SHOCK. FIXTURE INSTALLATION REQUIRES KNOWLEDGE OF LUMINAIRES ELECTRICAL
SYSTEMS. IF NOT QUALIFIED, CONTACT A QUALIFIED ELECTRICIAN.
BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.
MAKE SURE THE SUPPLY VOLTAGE IS THE SAME AS THE RATED LUMINAIRE FIXTURES VOLTAGE.
TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR SHARP
OBJECTS. SUITABLE FOR DAMP LOCATIONS.
Warnings and Safety
• This sprayer should only be operated and maintained by someone who is familiar with it's operation and correct maintenance
practices as outlined in this manual.
• Larson Electronics is not liable for decreased reliability, damages, or injuries due to improper maintenance or modifications to the
sprayer.
• Do not use this sprayer in an explosive or flammable environment.
• Always keep the sprayer dry and clean. Do not submerge in water or use in overly wet location to protect the motor and
electronics from water damage.
• PLEASE NOTE: Disassembly of sprayers REQUIRED for battery replacement. Replacement batteries are for maintenance and
NOT for swapping while in the field to extend spray time.
o CAUTION: Battery contains high voltage and may cause electric shock.
The IND-MD-DF-ESF-XX-SP0104 from Larson Electronics is a Replacement Battery for Electrostatic Sprayers. This
replacement battery can be used to replace missing, damaged, or discharged batteries in electrostatic sprayers.
Replacement Instructions
• Make sure unit is turned off. It is recommended to
wear rubber gloves while replacing battery to avoid
electric shock while replacing battery.
• Remove bottom panel of unit by laying unit on its side
and unscrewing the seven (7) screws on the bottom.
Larson Electronics, LLC
Replacement Battery for Electrostatic Sprayers
Instruction Manual
Phone: (800) 369-6671
Fax: (903) 498-3364
IND-MD-DF-ESF-XX-SP0104
www.larsonelectronics.com
1 of 3

Advertisement

loading

Summary of Contents for Larson Electronics IND-MD-DF-ESF SP0104 Series

  • Page 1 • This sprayer should only be operated and maintained by someone who is familiar with it's operation and correct maintenance practices as outlined in this manual. • Larson Electronics is not liable for decreased reliability, damages, or injuries due to improper maintenance or modifications to the sprayer.
  • Page 2 • Slide the battery pack back into its housing slot. • Align and screw in the bottom panel of the unit. The sprayer is now ready for use. 2 of 3 Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com...
  • Page 3 Larson Electronics. THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS. SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT SALES@LARSONELECTRONICS.COM OR BY PHONE AT 1-800-369-6671 FOR FURTHER ASSISTANCE.