Delfield N8118B Specifications

N8100B
Drop-In Self-Contained Mechanically Cooled Cold Pans
MODELS
❑ N8118B
18" mechanically cooled cold pan
❑ N8130B
30" mechanically cooled cold pan
❑ N8143B 43" mechanically cooled cold pan
❑ N8156B 56" mechanically cooled cold pan
Model N8156B
SPECIFICATIONS
Top is one-piece 20-gauge stainless steel. Interior liner
is 22-gauge stainless steel and is creased to a 1.00"
(2.43cm) diameter drain. Integral V-stamped pan
rest recessed 2" (5.1cm) to accommodate 12" x 20"
(30.5cm x 50.8cm) pans 4" (10.2cm) or 6" (15.2cm)
deep supplied by others. Product temperatures of
33°F (1°C) to 41°F (5°C) are maintained at 86°F
(29˚C) ambient room temperature, meeting NSF 7
requirements. Adapter bars are standard.
Sides and bottom are wrapped with refrigeration
lines and insulated with high-density closed-cell poly-
urethane. Exterior housing is 24-gauge galvanized
steel.
Condensing unit is suspended below the cold
pan on a 16-gauge steel frame and uses HFC-134a
STANDARD FEATURES
• NSF-7 certified performance
• Integral V-stamped pan rest
• Polyurethane foam insulation
• Push-in perimeter gasket
• Stainless steel louver provided
• Environmentally friendly HFC-134A
refrigerant
• 1" drain standard
• Thermostat for temperature control
refrigerant. Temperature control has an ON/OFF position to
shut down cold pan. Unit has an 8' (2.4m) cord and NEMA
5-15P plug.
A stainless steel louver is provided for field installation;
cutout dimension is 12" x 23.5" (30.5cm x 59.7cm).
A second opening at the rear of the cabinet should be
provided at installation to allow for proper air circulation.
980 S. Isabella Road Phone: 800-733-8948
Mt. Pleasant, MI 48858 Fax: 800-669-0619
www.delfield.com Email: info@delfield.com
Project __________________________
Item ____________________________
Quantity _________________________
CSI Section 11400
❑ N8169B
69" mechanically cooled cold pan
❑ N8181B
81" mechanically cooled cold pan
OPTIONS AND ACCESSORIES
Custom sizes and styles
❑
Single or double service flip-up sneezeguards
❑
Relocate compressor
❑
Mullion fan assembly
❑
Remote refrigeration (specify refrigerant)
❑
*220V/50 cycle
❑
*Inclusion of this option will alter the electrical
specifications of the unit
Approval _________________
Date____________________