Page 1
Owner’s Guide Bedienungsanleitung Notice d’utilisation Guía del usuario Manuale di istruzioni COWIN SE8 Active noise canceling bluetooth headset...
– Be aware of how sounds that you rely on as reminders or warnings may vary in character when using the headphones. • Do NOT use the headphones if they emit any loud unusual noise. If this happens, turn the headphones off and contact COWIN customer service.
The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices. DON’T attempt to remove the rechargeable lithium-ion battery from this product. Contact your local COWIN retailer or other qualified professional for removal.
Page 4
Please contact COWIN customer service at https://www.cowinaudio.com for further information. This product is covered under warranty for a period of 18-month free maintenance and 30-day unconditional return policies. If you have any quality problems about the product , please contact COWIN customer service. E-mail: support@cowinaudio.com Phone: +1 (929) 359-6668 ( Mon-Fri 9:00 a.m.
Page 5
Noise Cancelling Modes ....................9 Ambient Sound Modes ....................9 ..... Switch Between Noise Cancellation and Ambient Sound Modes .................. Cowin Active Noise Cancelling Battery Charging Charge the headphones ....................9 Charging time ......................9 Status Indicators Bluetooth® indicator ......................10 Battery indicator .......................
3.5 mm audio cable Airline headphone adapter Note: If any part of your product is damaged, do not use it. Contact your authorized COWIN customer service. E-mail: support@cowinaudio.com Phone: +1 (929) 359-6668 ( Mon-Fri 9:00 a.m. to 5:30 p.m. PST ) Recommend Website: https://www.cowinaudio.com (Support live chat)
H E A D P H O N E C O N T R O L S Noise cancellation on/Off switch Volume up / Skip forward button Power / Bluetooth / Call control button Volume down / Skip backward button Audio jack USB charging port Power on...
H E A D P H O N E C O N T R O L S Headphone functions Media playback and volume functions The headphone controls are located on the right earcup. Function What to do Play /Pause Short press the Multi-function button Skip forward Long press the button...
Page 9
4, Short press the NC button again, both noise canceling function and Ambient Sound Mode is off. Tip: Each press of the NC button changes the function. Loop in turn. Cowin Active Noise Cancelling Active Noise Cancelling (ANC) mainly focuses on cancelling out lower frequency sounds like engines, aviation environment, trains, traffic noise, etc, so our valuable customers can focus on their music, movies, or books without being disturbed by outside noises.
2. On your mobile device, enable the Bluetooth feature. Tip: The Bluetooth feature is usually found in the Setting menu. 3. Select your headphones from the device list. Choose “COWIN SE8” to connect COWIN SE8 Tip: Once paired, you hear “Connected” and see the indicator flash blue slowly.
Page 11
B L U E T O O T H C O N N E C T I O N S If you still have issue, contact COWIN customer service. E-mail: support@cowinaudio.com Phone: +1 (929) 359-6668 ( Mon-Fri 9:00 a.m. to 5:30 p.m. PST ) Recommend Website: https://www.cowinaudio.com (Support live chat)
Your headphones are covered by 18-month warranty. Visit our website at www.cowinaudio.com for details of the warranty. To register your product, visit www.cowinaudio.com for instructions. Failure to register will not affect your limited warranty rights. If you still have issue, contact COWIN customer service. E-mail: support@cowinaudio.com Phone: +1 (929) 359-6668 ( Mon-Fri 9:00 a.m.
- Disable the Bluetooth feature and then re-enable. Headphones don’t connect - Delete your SE8 from the Bluetooth list on your device. Connect again. with your mobile device • Move your mobile device closer to the headphones and away from any interference or obstructions.
Page 14
Symptom Solution • If the Bluetooth signal is weak, out of range or interferes, the Bluetooth® wireless connection may fail or the sound cuts in and out. Please see the information below to improve signal quality and reduce the possibility of interference. •...
Page 15
Symptom Solution No sound from a device • Secure the ends of the back-up audio cable. • Increase the volume on your headphones, your mobile device and music source. connected by the back-up • Connect another device (see page 11). audio cable Poor sound quality from a •...
Need help?
Do you have a question about the SE8 and is the answer not in the manual?
Questions and answers