Reer FMC-B12 Mounting Instructions
  1. Manuals
  2. Brands
  3. Reer Manuals
  4. Security System
  5. FMC-B12
  6. Mounting instructions

Reer FMC-B12 Mounting Instructions

Column for light curtains
Hide thumbs
1
2
3

Advertisement

Table of Contents

GENERAL

These mounting instructions contain information about the correct mounting of the column.
The assembly of the FMC-B12 with the column rotation flange;
The assembly of the FMC-B12 stand for mounting on the FMC-CB/FMC-CBL stand bottom;
The correct mounting of the barrier on the column (rif. Normative ISO 13855 / EN999-2008);
Alignment Emitter - Receiver;
Please find detailed information about the function of the light curtains / light grids in the relevant
mounting and wiring instructions.
ASSEMBLY OF THE FMC-B12 WITH THE ROTATION FLANGE (Fig. 1)
Assembly the rotation flange with the profile using the correct provided screws (as shown in figure 1).
8540743 Rev.1
FMC-B12
COLUMN FOR LIGHT CURTAINS
Figure 1
www.reer.it
4/6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FMC-B12 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Reer FMC-B12

  • Page 1 The assembly of the FMC-B12 with the column rotation flange;   The assembly of the FMC-B12 stand for mounting on the FMC-CB/FMC-CBL stand bottom;  The correct mounting of the barrier on the column (rif. Normative ISO 13855 / EN999-2008);...
  • Page 2 ASSEMBLY OF THE FMC-B12 STAND WITH THE STAND BOTTOM; (Fig. 2)  Mount the FMC-CB/FMC-CBL stand bottom on the floor (see mounting instruction for stand bottom).  Loosen the three allen screws and remove the washers.  Assembly the column to the stand bottom, centering the FMC-B column rotation flange with the guides of the FMC-CB/FMC-CBL stand bottom upper plate.
  • Page 3 For an exact alignment of emitter and receiver, loosen the three allen screws (C) that fix the rotation flange and rotate the two columns until the barrier signal LEDS light on (ref. Technical manual). INSERT INSERT B = TILT C = ROTATION Figure 3 DIMENSIONS FMC-B12 FMC-B12 FMC-CB FMC-CBL Figure 4 8540743 Rev.1...

Table of Contents