Further Information - Eneo TPD-62V2812P0A Quick Installation Manual

MAIN
DAY/NIGHT
PICT ADJUST
SPECIAL
SYSTEM
EXIT

Further information

The manual is also available from the eneo web site at www.eneo-security.com.
DEFAULT DESCRIPTION
Sets DAY / NIGHT to EXT, AUTO, COLOR and B/W. SMART IR can be set to
reduce the saturation by the strong IR illumination in the night in any
menu of EXT, AUTO and B/W(NIGHT) Setting SMART IR in any menu is
identically applied to other menu. Zero(0) turns off SMART IR and High
setting avoids the saturation strongly but the corners will be darker
accordingly. IR LED Control(AUTO/OFF) is available with IR LED model
only. If IR LED is set to OFF, IR LED will be turned OFF but DAY or NIGHT is
still determined by the built-in light photo sensor.
EXT – DAY or NIGHT is determined by the built-in light photo sensor.
Camera with IR LED must be set to EXT.
AUTO – Used when DAY or NIGHT is determined by light level through
EXT or AUTO
the lens and DAY from/to NIGHT is switched automatically by the scene
brightness. D<-->N THRESHOLD, D<->N DELY and SMART IR can be set
in the menu. When EXPOSURE>AGC is less than 12, DAY/NIGHT AUTO is
disabled and forcibly switches to ___(DAY) to avoid the malfunction.
EXT, B/W(NIGHT) and COLOR(DAY) is independent on AGC level. When
EXTERNAL IR LED is used with NON IR LED model, please set to IR LED
MODE ON.
B/W(NIGHT) – Forcibly removes IR cut filter and switches to B/W
regardless of light level.
COLOR(DAY) – Forcibly DAY/NIGHT is disabled and outputs color
video.
Sets WHITE BAL, SHARPNESS, COLOR GAIN, GAMMA, SHADING.
Sets MIRROR/FLIP, PRIVACY, MOTION, PIXEL DEFECT, TITLE SET, DISPLAY,
DEFOG, POINTING ZOOM
Sets TV SYSTEM, RESOLUTION, COMM.SETUP, UTC CONTROL, LANGUAGE
OUTPUT SELECT and FACTORY DEFAULT
SAVE & EXIT – Exits the menu after saving the parameters. EXIT – Exits
the menu without saving the menu.
EN
13