Delfield Meridian MRR1S-S Specifications

MERIDIAN SERIES
Solid Door Shallow Reach-In Refrigerators
MODELS:
 MRR1S-S Single section
Full height door
 MRR1SR-S
Remote
 MRR1S-SH
Single section
Half height door
 MRR1SR-SH Remote
MRR1S-S
SPECIFICATIONS
Exterior: Cabinet front and shroud shall be 22-gauge
stainless steel. Exterior sides shall be made of aluminum.
Facing of shroud shall be easily removable without the
use of tools.
Cabinet interior shall be anodized aluminum. Bottom &
top of liner shall be die-stamped to provide radius corners
and a recessed bottom. Base shall be fully insulated with
high-density foamed in place polyurethane.
Interior shall have three epoxy-coated wire shelves per
door section. Shelf support pilasters shall be heavy-duty
with shelves adjustable at 1.0" (2.5 cm) increments. Unit
will be mounted on 6" (15.24 cm) metal legs.
Doors: Solid doors shall have a 22-gauge stainless steel
exterior & anodized aluminum interior liner. Doors shall
be fully insulated with high density foamed in place
polyurethane. Each door shall have two self-closing, cam-
lift style hinges. Doors shall be easily removable without
®
 MRR2S-S
 MRR2SR-S
 MRR2S-SH
 MRR2SR-SH
STANDARD FEATURES
• Shroud removes without tools, for easy condenser
maintenance
• Built in door locks
• Durable stainless steel doors and shroud, for lasting good
looks
• New high-density foam insulation cuts energy costs
• Big, easy grip handles are easy to find, don't intrude into
kitchen traffic
• Attractive aluminum side panels are easy to clean and
corrosion resistant
• Heavy-duty hinges with stay open feature
• Refrigeration system is located outside the food zone, more
space for product storage
• Mini watt door heaters eliminate condensation with
minimal energy cost
• Easy to read dial thermometer
• Tri seal door gaskets lower energy costs with a unique
insulating design
• Epoxy coated shelves—corrosion resistant, 300-lb.
capacity. Flexible placement on 1" centers allows
maximum storage
use of tools. Door gaskets shall be magnetic snap-in
style to allow simple replacement. Door handles shall be
recessed.
• Please specify right or left hand hinging at time of
order.
Mechanical controls shall be located behind a removable
shroud facing.
Refrigeration: Refrigeration system shall use R404A
refrigerant. System shall be completely outside food zone
to maximize internal storage space. System shall utilize
a dual diversion high flow air distribution system, and
shall be a high capacity design. Evaporator coils shall be
coated to prevent corrosion. Cabinet shall maintain 34
to 40 F (1 C to 4 C) internal temperature.
0 0 0
980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com
Project __________________________
Item ____________________________
Quantity _________________________
CSI Section 11400
Two section
Full height doors
Remote
Two section
Half height doors
Remote
• Aluminum interior stands up to food acids without
corroding
• Lots of interior storage space for the money
• Rugged metal legs, adjustable to compensate for
uneven floors
OPTIONS AND ACCESSORIES
 Stainless steel exterior sides
 Stainless steel interior
 Stainless steel kick plate
 Door and end laminate
 Stainless steel exterior back
 Digital thermometer
 TXV
 Chrome Shelves
 Tray Slides
 220/50/1 electrical
 Electronic control
 Stainless steel legs
 Casters
Single Voltage Models Only: Electrical connections
shall be 115 volt, 60 hertz, single phase, with an
eight ft. (2.4m) long electrical cord & plug as shown
on reference chart. Cord & plug shall be wired to the
junction box on top of the unit.
Dual Voltage Models Only: Electrical connections
shall be 115/208-230 volt, 60 hertz, single phase,
and must be hard-wired to the junction box located on
top of the unit.
F
0
Approval _________________
Phone: 800-733-8948
Fax: 800-669-0619
Date____________________
Email: info@delfield.com