Pioneer L50USD14N Instruction Manual page 19

This menu will appear if you chose the wireless option.
We recommend you select Scan, this option will scan and find all
available wireless networks and list them for you.
6. Press the buttons to select scan. Then press the
button to go to the next screen.
7. All the wireless networks will be listed, press the
buttons to select your network (it will probably be the top
one in the list). Then press the
screen.
You will now have to enter your routers password. The password
is case sensitive so you may need to check this.
8. Press the
buttons to select each letter then press
the OK button to confirm the letter.
9. Once the password is entered scroll down to the OK button
and press OK.
You will now see the following messages, when you see the
'Connection Successful' message press the
Depending how you receive your TV choose Antenna or Cable.
• If you have an aerial the select Antenna.
• If you have cable that connects via the aerial lead then select
Cable.
• If you have a digital cable box that connects via a HDMI
cable, skip this section you do not need to tune in your TV.
You just need to select the HDMI source.
Pioneer L50/55USD14N_IB_English.indd 19
button to go to the next
button.
4
Initial Setup
GB
19
25/04/2014 10:37