Advertisement
Quick Links
POST CAP LED
SOLAR LIGHT
model no. 24812
Assembly Instructions
IMPORTANT: Please read this manual carefully
before beginning assembly of this product.
Keep this manual for future reference.
Overview
This product is designed to the highest technical specifications and standards. It will supply years of maintenance-free use.
Please read these instructions thoroughly prior to installation, then store in a safe place for future reference. If at any time
you are unclear about this product, or require further assistance please do not hesitate to contact our trained professionals
operating the customer support line at 1-877-615-1378 Monday to Friday between the hours 8:00 AM to 4:00 PM Eastern
Standard Time or email support@fusionproducts.ca.
About Your Solar Light
During the day your solar panel will convert the sun's light and/or UV rays into electrical power that will charge the rechargeable
battery. When it becomes dark, the solar light will turn on using the power stored in the rechargeable battery as it will detect no
daylight. The unit's light output strength and duration depends on how many hours and how much sunlight and/or UV rays your
panel absorbs throughout the day.
For maximum output place the solar panel in an area where there is direct sunlight for at least 8 hours in a given day. Do not
install your solar light in a shaded area. The selected location should not be near nighttime light sources such as porch lights,
street lights or pool lights, as these may cause the solar light to turn off prematurely.
Advertisement
Related Manuals for Fusion 24812
Summary of Contents for Fusion 24812
- Page 1 POST CAP LED SOLAR LIGHT model no. 24812 Assembly Instructions IMPORTANT: Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. Overview This product is designed to the highest technical specifications and standards. It will supply years of maintenance-free use.
- Page 2 24812 Getting Started Please do not throw away any packing material until all parts are verified as present. Parts List POST CAP LED SOLAR LIGHT model no. 24812 Assembly Instructions IMPORTANT: Please read this manual carefully before beginning assembly of this product.
- Page 3 24812 Assembly & Operation Figure 1 For First Time Use: Step 1: Remove the pull tab from the battery compartment (Figure 1). Step 2: Fully charge the battery before first use. Charge under direct sunlight for 2 days. Your solar light will automatically turn on once it gets dark.
- Page 4 1-Year Limited Product Warranty This product is covered under a one year limited warranty. Fusion Products Ltd. warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of one year from date of purchase.