Sennheiser MOMENTUM Wireless M2 AEBT Instruction Manual page 17

Getting started
Pairing the headphones to a Bluetooth device
Ensure that your headphones are within the 20 cm range of your smartphone
during this procedure.
1. Switch the headphones on (see page 17). Continuously press the power
button until you hear the voice prompt „pairing" and the LED flashes blue
and red.
The headphones are in pairing mode.
2. Enable the Bluetooth visibility from your smartphone.
3. From your smartphone, search for Bluetooth devices.
All active Bluetooth devices in the proximity of your smartphone are
displayed.
4. From the list of Bluetooth devices that appears, select „MOMENTUM M2
AEBT" to establish a Bluetooth connection to the headphones. If necessary,
enter the default PIN code "0000".
If the pairing is successful, you hear the voice prompt „connected" and the
LED switches off.
1
MOM ENTU
M
L
20 cm
4s
3
Menu
Add device
› connected ‹ › connected ‹
L
If no connection is established within 5 minutes, the pairing mode breaks
down completely and the headphones go to the disconnected state. Switch
the headphones off and repeat the pairing procedure.
2
› power on ‹
› pairing ‹
1s
4
MO MEN
TUM
Menu
Bluetooth on
Bluetooth o
MOMENTUM M2 AEBT
MOMENTUM M2 AEBT
Keyword: 0000
M2 AEBT | 15