TVD1804-24 × 1366 768 DC 12V; AC 100-240V~50/60Hz Overview of front and side panel 48 W × × 21.9 7.2 15.3 Inch VOL + VO L- MENU SO URCE 3.2 Kg POWER Remote control sensor / Power indicator After placed a disc in the disc tray, press this button to play the disc and press it again to pause.
Page 6
POWER: To set the unit in standby mode; press it POWER MUTE again to switch it on. MUTE: To mute the sound. GOTO ANGLE Red / Green / Yellow / Blue NUMBER BUTTONS (0-9): To input the number information, such as channel number and so on. EPG: To display electronic program guide.
Page 7
D.MENU Press D.MENU button and the screen will display the root menu if your disc supports multilayer menu; press it to turn on/off PBC when playing a VCD 2.0 disc. EJECT ( ) Press the EJECT button to eject/enter a disc when SUBTITLE POWER MUTE...
Page 8
CVBS/Y AC 100-240V~ COAX EARPHONE PC AUDIO 50/60Hz Antennas with 300ohmflat twins Leads...
Page 9
CVBS/Y AC 100-240V~ COAX EARPHONE PC AUDIO 50/60Hz CVBS/Y AC 100-240V~ COAX EARPHONE PC AUDIO 50/60Hz...
Page 10
CVBS/Y AC 100-240V~ COAX EARPHONE PC AUDIO 50/60Hz CVBS/Y AC 100-240V~ COAX EARPHONE PC AUDIO 50/60Hz Connect a USB 2.0 memory device into USB slot of this TV for multimedia files playback. 1. This USB slot only supports Music (MP3) and Photo (JPG) multimedia files playback.
Page 11
CVBS/Y AC 100-240V~ COAX EARPHONE PC AUDIO 50/60Hz CVBS/Y AC 100-240V~ COAX EARPHONE PC AUDIO 50/60Hz × Up to 1366 768@60Hz...
Page 14
8. OverScan (HDMI mode only) Turn on/off OverScan if Users found the image wasn't fully displayed on screen. 9. Restore Default This item is used to reset to factory default settings.
Page 17
USB 2/SD OPERATION Card Reader and USB Player (USB 2) The card reader can read 3 kinds of cards (SD/MMC/MS) and USB 2 can read USB storage. To access USB 2 device or SD/MMC/MS card, please insert the device in the slot as shown in this illustration.
Page 18
This product is a high resolution LED display device and a few cell defects can occur in the manufacture of the LED. Several colored dots visible on the screen would be acceptable in line with other LED manufacturers and would not mean that the LED is faulty. We hope you will understand that it could not be changed or refunded.
Need help?
Do you have a question about the TVD1804-24 and is the answer not in the manual?
Questions and answers