Safety And Instructional Decals - Exmark ARX481CKA30000 Operator's Manual

Safety

Safety and Instructional Decals

• Keep all safety signs legible. Remove all grease,
dirt and debris from safety signs and instructional
labels.
• Replace all worn, damaged, or missing safety
signs.
• When replacement components are installed, be
sure that current safety signs are affixed to the
replaced components.
• If an attachment or accessory has been installed,
make sure current safety signs are visible.
93–6686
1. Hydraulic oil
115-2047
1. Warning—do not touch the hot surface.
116-9391
117–2718
2. Read the Operator's
Manual.
• New safety signs may be obtained from
your authorized Exmark equipment dealer or
distributor or from Exmark Mfg. Co. Inc.
• Safety signs may be affixed by peeling off the
backing to expose the adhesive surface. Apply
only to a clean, dry surface. Smooth to remove
any air bubbles.
• Familiarize yourself with the following safety signs
and instruction labels. They are critical to the safe
operation of your Exmark commercial aerator.
1. Warning—stay away from moving parts, keep all guards
and shields in place.
1. Cutting hazard of hand and foot–stay away from moving
parts.
1. Entanglement hazard, belt—stay away from moving
parts; keep all guards in place.
10
120-9570
121-6150
121–6161