Advanced ICE 1296-1 Manual

Jeep/Dodge Caravan
Camera Integration
PLEASE READ BEFORE BEGINNING INSTALLATION
Installation Terms & Conditions
• If this Installation requires opening the factory monitor or radio to insert ribbon cables or sub boards, Advanced
ICE Pty Ltd advises that the installation be carried out by an installer with experience working with electronic circuit
boards. Advanced ICE highly recommends the use of a suitable workbench with Antistatic Mat and Earth Strap to avoid
possible damage from a static charge. Advanced ICE Pty Ltd does not accept any responsibility for damaged
caused either to the components in the vehicle or the product, so please do not proceed with the installation if
you do not accept these terms.
• All labels on the product including software versions and serial numbers must not be covered, damaged or re-
moved. This may void the warranty on the product.
• Ensure that all left over accessories, including remote controls and cables, are given to the customer. If replace-
ments are required in the future they will be charged.
• Please ensure the installation of this product will not interfere with any factory safety equipment (e.g. Airbags)
• If working with Airbags, be sure to disconnect the vehicle Battery before beginning work. This product and the following
instructions are designed for installation by a qualified 12v installer, car audio installer or auto electrician.
• Interfaces and Navigation modules must not be installed in a location where they will be exposed to extreme
temperatures including, but not limited to, installation on top of a vehicles radio, transmission tunnel or firewall.
Damage caused by exposure to heat is not covered under warranty.
• If a navigation product is being installed, the end user will need access to the SD Card so as to perform navigation
software updates. Please ensure the navigation module is installed in an easy to access location.
• If the Navigation SD card is not easily accessible by the end user, you the seller, will be responsible for any labour
to assist the customer to access the SD card to perform navigation updates.
Overview
This system is specifically designed for adding a caravan camera to the factory screen and it will automatically switch to
the caravan camera once it is connected to the vehicle and the camera is powered up and generating a video signal.
When the caravan is unplugged from the car the system will revert to the normal factory reverse camera operation.
Important Product Information
• This product comes with a 2 year warranty against manufacturer related defects.
• Only use with an NTSC camera. Some Jeep/Dodge Screens are not compatible with PAL type cameras.
FOLLOW US
ADVANCEDICE1
WWW.ADVANCEDICE.COM.AU
ADVANCEDICE ADVANCEDICE ADVANCEDICE
1296-1_INS_V1.3