Siemens SR23EI28ME User Manual page 43

Fault
E:32-00 will light up altern-
ately or indicator for water
supply lights up.
E:92-40 will light up altern-
ately.
E:61-03 will light up altern-
ately. Water is not drained.
E:61-02 will light up altern-
ately.
E:90-01 will light up altern-
ately.
Cause
Filters are soiled or blocked.
Wastewater hose is blocked
or kinked.
Siphon connection is still
sealed.
Cover of the wastewater
pump is loose.
Wastewater pump is
blocked.
Cover of the wastewater
pump is loose
Mains voltage is too low.
Troubleshooting en
troubleshooting
Clean the filter.
6.
Re-insert the filter in the supply
7.
hose.
Screw the water connection back
8.
on.
Check the water connection for
9.
leaks.
Restore the power supply.
10.
Switch the appliance on.
11.
Clean the filters.
▶
→ "Cleaning filters", Page 39
Reposition the wastewater hose
1.
without kinks.
Remove residues.
2.
Check the connection to the siphon
▶
and open if necessary.
Secure the cover of the Wastewater
▶
pump → Page 54 so it clicks into
position.
Clean the wastewater pump.
▶
→ "Clean wastewater pump",
Page 54
Secure the cover of the Wastewater
▶
pump → Page 54 so it clicks into
position.
This is not a fault on the appliance.
Contact an electrician.
1.
Have the mains voltage and elec-
2.
trical installation checked by an
electrician.
43