Operation - Pyle PDWMKHRD22WM.5 User Manual

Operation

1. Connect the receiver to a power outlet through the power adapter provided and
turn on the receiver.
2. Put two alkaline AA batteries into the battery compartment of the microphone.
Please ensure the positive and negative ends are positioned in the correct direction
3. Power on the handhold microphone. In case of any frequency interference, quick
press the power button on the microphone will be turn to a di erent frequency.
There are up to eight frequencies for you to choose .
4. Please note that it will take a few seconds for the receiver to automatically
syndicate the frequency with the microphone each time the power button is
pressed.
5. When the product is delivered from the factory, ID of receiver and handheld are
not matched. The handheld and receiver between the two sets of products can
be used interchangeably. But 2 sets of products can not be used in the same
environment at the same time. You need match the product ID if 2 sets of products
are used at the same time.
6. The matching operation is as follow. Connect the power cable of the receiver and
turn o the power switch. After turn o the handheld, press and hold the power
button of handheld for 5 seconds until the ID is displayed on the display.
Immediately release the power switch and quick press the power switch again
within 1 second.
7. To connect the receiver to a device such as a computer, TV, and speaker, etc.,
please refer to the connection diagram section.
8. Note that in order to protect the battery, the handheld will automatically turn
o if there is no sound input to the microphone for exceed 5 minutes. Turn on
the handheld again if you need to work.
Note:
Wireless BT Connection
The product comes with built-in Wireless BT function and you can choose to
pair the receiver with your Wireless BT device as well.
1. Once you power on the receiver, the receiver will become discoverable as Pyle BT.
2. In the settings of your Wireless BT enabled devices, set it to 'discover' . From the
Wireless BT device list. Select the Pyle BT device. When Wireless BT is used to
connect a device (Say a Wireless BT enabled cellphone) Please connect the
receiver via audio out port to the sound output device (speaker or sound bar)
6
www.PyleUSA.com