Table of Contents
Advertisement
Model
Power Source
Power Consumption (W)
Air Circulation (m³/h)
Noise Level (High Speed)
Timer (Hrs)
Net Weight (Kg)
Dims (HxWxD) mm
When used in a workplace, this product should be safety-tested yearly by a qualified
electrician (PAT Tested). We recommend that it is PAT tested regularly when used
in a domestic environment.
GENERAL SAFETY REQUIREMENTS
Domestic wiring must be tested periodically by a qualified electrician at least once
every 10 years or at every change of occupancy.
For office and retail premises, and buildings such as village halls, the wiring must
be inspected at least once every 5 years.
It is recommended that all buildings be fitted with smoke alarms (it is mandatory for
new buildings).
Before cleaning, turn the heater off, and disconnect from the mains supply. The
heater may then be cleaned using a damp cloth with a drop of washing-up liquid to
remove any dust or dirt from the case. Do no use stronger detergents or solvents
as these may damage the plastic.
Using a dry 1" (25 mm) paint-brush, remove any dust from the grilles.
If the mains lead is damaged, it must be replaced by the manufacturer or and
authorised service centre.
EH1507
AC 230V 50Hz
40W
168
< 48 dB
1, 2, 4 & 8
4.8
396x466x166
PAT TESTING
MAINTENANCE
11
Ver. 1 - 06/17
Advertisement
Table of Contents
