Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Trotec TDP-DS
Summary of Contents for Trotec TDP-DS
- Page 1 TDP DS OPERATING MANUAL PRESSURE SWITCH...
-
Page 2: Table Of Contents
Notes regarding the operating manual......... 2 Safety .................. 2 Information about the device.......... 5 TDP DS Transport and storage............ 6 Assembly and installation............. 6 https://hub.trotec.com/?id=44133 Operation ................ 8 Safety Errors and faults.............. 9 Read this manual carefully before starting or using the Maintenance ................ 10 device. Always store the manual in the immediate vicinity Technical annex.............. 10... - Page 3 General safety warnings – Electrical safety General safety warnings – Personal safety • The device is to be supplied with a rated residual current • Never insert any objects or limbs into the device. of no more than 30 mA by means of an RCD (Residual •...
- Page 4 Improper use Residual risks The device is not suitable for the operation of irrigation systems Warning of electrical voltage in business, industry or in public areas (e.g. park areas). Work on the electrical components must only be Using the device in swimming pools and the like is prohibited. carried out by an authorised specialist company! The device is not suitable for increasing the pressure of existing Warning of electrical voltage...
-
Page 5: Information About The Device
Information about the device Device description In order to deliver service water for home and garden, the pressure switch serves to control the pump. The device is installed between a pump and one more extraction points (e.g. a water tap or a garden sprayer). It monitors the pressure in the water line. -
Page 6: Transport And Storage
Transport and storage Assembly and installation Note Scope of delivery If you store or transport the device improperly, the • 1 x Pressure switch device may be damaged. • 1 x Manual Note the information regarding transport and storage of the device. Unpacking the device 1. - Page 7 Setting the switch-on pressure Note The power supply of the pump has to be provided by Warning the pressure switch. Do not connect the pump to an Setting the switch-on pressure may only be carried out installed mains socket! by specialist companies for water installation. Note When the switch-on pressure is set too low, the pressure cannot To avoid intrusion of water into the switchboard and...
-
Page 8: Operation
If there is no more air in distribution network, opening the water tap causes the water pressure to drop. This is detected by the pressure switch. It will automatically activate the garden pump for as long as the water tap is opened. After closing the water tap, the pressure in the distribution network increases. -
Page 9: Errors And Faults
• Switch-on pressure is set close to the maximum pressure Setting the switch-on pressure of the pump: Warning – The pump operates continuously or frequently switches Setting the switch-on pressure may only be carried out on or off. by specialist companies for water installation. –... -
Page 10: Maintenance
Please contact the customer service. If necessary, bring the - max. 4000 W (400 V/AC, 10 A) device to an authorized specialist electrical company or to for three-phase connection Trotec for repair. Power input 1100 W Power consumption ≥ 1,1 kW with circuit breaker Max. -
Page 11: Disposal
Note Circuit diagram for three-phase pump connection If your pump is equipped with more than 1.1 kW A switching device must be interposed when three-phase capacity, you should insert a standard power protection pumps are used. The chosen capacity for the protection has to or an appropriate power relay. - Page 12 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...