Advertisement
English Version
LJ2 Lifejacket Light
Installation and Maintenance Instructions
Description
LJ2 is a two-piece manually-activated versatile light designed for rapid attachment to lifejackets using a
variety of fixing methods
Daniamant Limited
Unit 3, The Admiral Park, Airport Service Road, Portsmouth, UK PO3 5RQ
Telephone: +44 (0)23 9267 5100 Facsimile: +44 (0)23 9267 5101
www.daniamant.com
51-7005 Issue 10 (C6495)
Advertisement
Table of Contents
Summary of Contents for Daniamant LJ2
- Page 1 LJ2 Lifejacket Light Installation and Maintenance Instructions Description LJ2 is a two-piece manually-activated versatile light designed for rapid attachment to lifejackets using a variety of fixing methods Daniamant Limited Unit 3, The Admiral Park, Airport Service Road, Portsmouth, UK PO3 5RQ Telephone: +44 (0)23 9267 5100 Facsimile: +44 (0)23 9267 5101 www.daniamant.com...
- Page 2 If the unit is damaged or corrosion is visible the unit is to be replaced. 3. Remove pull tag or toggle from LJ2 battery pack – light should illuminate immediately. If light fails to operate, replace light and cable assembly with a checked unit. If light operates, replace toggle in battery pack;...
- Page 3 In addition to the acces- sories shown, the lamp- housing may be sewn in position and the battery placed in a pocket. Testing and switch activation The pull tag must have a direct pull and not be pulled at an angle.
- Page 4 To ensure compliance with the WEEE and Battery Regulations, the Survivor Lo- cation Lights placed on the market in the UK or Denmark should be returned to Daniamant in the UK or Denmark, or deposited in your nearest WEEE Designated Collection Facility, operated by your Local Authority.
Need help?
Do you have a question about the LJ2 and is the answer not in the manual?
Questions and answers