USAGE PRECAUTION
3 Periodical cleaning
1 . Machine
● Remove the throat plate and clean the
feed dog. Reassembly should be done by
screwing in the screw 2-3 rotations by hand
at first, then tightening them evenly using a
long-shafted screwdriver.
Feed dog
2 . Motor
Remove dust from the motor filter every one or two months. (Continued operation with the filter
clogged with lint or dust may overheat the motor.)
3 . Control Box
Remove dust from the connector. (If the connector is covered with dust, the machine might
malfunction.)
● Lean the machine head and clean the hook
Hook
— 3 —
and remove any dust and /or lint inside the
bobbin case.
Feed bar
Hook