Summary of Contents for Davis Instruments Mounting Pole Kit
Page 1
O U N T I N G N S T A L L A T I O N This manual covers use of the Mounting Pole Kit with the Integrated Sensor Suite (ISS) of the Vantage Pro Davis Instruments sensor arrays, applying the principles shown here with the ISS.
Page 2
(As shown in Appendix C in the ISS manual.) Page 2 UPPORT 1/4" Hex Nut 1/4" Lock Washer Backing Plate U-Bolts Anemometer's Mounting Base 1/4" Flat Washer 1/4" Lock Washer 1/4" Hex Nut Mounting Pole Kit...
Page 3
OUNT THE XTENSION The extension tube is 21" long (and does not have a swaged end.) 1. In a fence-post or other flat vertical surface, drill two holes, using one of the 1-1/8" saddles as a guide. 2. Drill another set of holes at least 12"...
Page 4
1. Insert the swaged end of the support tube in the open top of the extension tube. 2. Place the U-bolt provided in the mounting pole kit around the tubes where they overlap. Secure with flat washers, lock washers, and hex nuts as shown in the illus- tration.
Need help?
Do you have a question about the Mounting Pole Kit and is the answer not in the manual?
Questions and answers