Summary of Contents for J.Burrows JBIR41410B
- Page 1 Quality Assurance Guide ASSEMBLY INSTRUCTIONS 4 SHELF INDUSTRIAL RACKING JBIR41410B This design and instruction booklet is subject to copyright. www.officeworks.com.au 1 Carton For spare parts or hardware call 1300 OFFICE 1 / 13...
- Page 2 Estimated Assembly Time: 30 minutes Furniture Assembly Instructions Style Guide Customer Service Contact Details Spare Parts & Hardware 1300 OFFICE People Required General Advice 2 / 13...
- Page 3 Tools Required CAUTION: Do not use tools other than those required, as this can damage your new item Tools Required To secure the unit to a wall you need following tools: NOTE Please check you have all hardware before assembling. •...
- Page 4 Parts List / Hardware List Beam x8 Reinforce x8 Post x2 Part Number: HWENDCAPIR Corner Protection x4 Shelf x4 Included Hardware: Part HWIR41410B M6X12 Screw x 16 M8X16 Screw x 16 M6 Nut x 16 M8 Nut x 16 Washer x 16 4 / 13...
- Page 5 Assembly Furnitur Step 1 Beam End Clip Tabs Step 2 NOTE: Make sure all Screws(C), Nut(D), Washer(E) are locked. 5 / 13...
- Page 6 Furniture Assembly Instructions Style Guide Step 3 Step 4 NOTE: Make sure all Screw(A), Nut(B) are locked. Step 5 Beam End Clip Tabs 6 / 13...
- Page 7 Furniture Assembly Instructions Style Guide Step 6 NOTE: Make sure all Screws(C), Nut(D), Washer(E) are locked. NOTE: Make sure all Step 7 Step 8 Screw(A), Nut(B) are locked. 7 / 13...
- Page 8 Furniture Assembly Instructions Style Guide Step 9 Beam End Clip Tabs Step 10 NOTE: Make sure all Screws(C), Nut(D), Washer(E) are locked. 8 / 13...
- Page 9 Furniture Assembly Instructions Style Guide Step 12 NOTE: Make Step 11 sure all Screw(A), Nut(B) are locked. Step 13 Beam End Clip Tabs 9 / 13...
- Page 10 Furniture Assembly Instructions Style Guide Step 14 NOTE: Make sure all Screw(C), Nut(D), Washer(E) are locked. Step 15 NOTE: Make sure all Screw(A), Nut(B) are locked. 10/ 13...
- Page 11 Furniture Step 16 Assembly Step 17 WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. To prevent this item from tipping over it must be permanently fixed to a wall. An anchor kit suitable for plaster walls is included with this item. Different wall materials may require a different anchor kit.
- Page 12 Furniture Assembly CAUTION The shelving unit is designed to carry up to 1000 kg per shelf. The product is intended to hold the maximum weight indicated. Exceeding the maximum weight will result in instability and may cause injury. Place equipment onto shelves evenly and ensure items do not overhang at sides, as ...
- Page 13 Warranty 8 years Product Warranty - valid for Australian customers only Officeworks Ltd warrants that this product will be free from defects and work as intended for 8 years from the date of purchase by the original customer.If the product has any defects or does not works as intended during the Warranty Period, Officeworks will ,at its election and at its expense,repair or replace the product.