Olympus Lock 720LM Installation Instructions

INSTALLATION
INSTRUCTIONS
IMPORTANT:
It is highly recommended
that you install the
prong driver and lock
cylinder into the lock
body and cycle to the
locked position before
assembling cam, cam
shifter and stop pin onto
the back of the lock.
Included Accessories:
1 plastic thumbturn
1 720-PL3 anti-rotation plate
and screws
1 720-3-1 short inverted cam
1 720-3-2 long vertical cam
1 720-CDLM cam shifter
1 720-CDDM cam shifter
1 720-KR cam shifter
1 725-1 6 pin core spacer
Lock diameter is 1-1/8." Drilled hole should be
slightly larger.
800-525-0954 | www.olympuslock.com
info@olympuslock.com
720LM/DM
1
720-CDLM
lost motion cam shifter
(standard function, non-
key-retaining)
720-PL3
anti-rotation plate
Included
Cams
for inverted function
SFIC Cam Lock
2
3
720-KR 720-CDDM
key-retaining (A Side)
drawer cam shifter key-retaining door
cam shifter
720-3-1 720-3-2
inbent cam for vertical
function (bottom-pin style)
Typical Installation
3
Optional cams Note: use of standard
and/or optional cams depends on your
720-CDDM
specific application.
(B Side)
key-retaining door
cam shifter
Installation/handing for
key-retaining option
LH
Left-hand (LH)
Hinged on left
VH
RH
Right-hand (RH)
Hinged on right
IH
Copyright © 2020 Olympus Lock, Inc.