Page 2
720LM/DM — INSTALLATION INSTRUCTIONS Optional Cams Optional Metal Punch Double-D metal hole punch is available separately. Punches double-D cut out in metal. For use with 1-1/8” diameter cam locks. CL-MP-118 Metal Punch 720-3-3 720-3-4 720-3-5 inbent cam for 3"straight cam for vertical...
Page 3
720LM/DM — INSTALLATION INSTRUCTIONS/CAM ASSEMBLY Assembled with: STOP! These instructions are for bottom-pin style 720-3-2 vertical long cam cams only. If your cam has the brass pin in the 720-3-4 extra long 3” cam middle, see the instructions on PAGE...
Page 4
720LM/DM — INSTALLATION INSTRUCTIONS/CAM ASSEMBLY Assembled with: Assembled with: 720-3-3 inverted long cam 720-3-1 inverted short cam 720-3-5 inverted long cam Standard Function Cam Assembly Key-retaining Function Cam Assembly Drawer Inverted Drawer Key removable Drawer in locked position only. Retaining...
Page 5
720LM/DM — INSTALLATION INSTRUCTIONS/CAM ASSEMBLY STOP! These instructions are for mid-pin style cams Assembled with: 720-3-2 vertical long cam only. If your cam has the brass pin on the bot- 720-3-4 extra long 3” cam tom, see the instructions on...