Gigabyte B460M D3H User Manual page 42

Installation Guidelines
A-1: Installation in AHCI mode
If the SATA controller has been configured in AHCI mode, please follow the steps below:
1. After entering the operating system, insert the motherboard driver disc into your optical drive. On the Xpress
Install screen, select Intel(R) Optane(TM) Memory System Acceleration
instructions to continue. When completed, restart the system.
2. After re-entering the operating system, follow the on-screen instructions to complete the settings, and then
the Intel Optane Memory application will appear automatically. All data on the Optane
® ™
erased. Make sure you back up the data before continuing. Follow the on-screen instructions to proceed.
When completed, restart the system.
3. Launch the Intel Optane
® ™
Memory has been enabled. (The SATA controller mode is changed to "Intel RST Premium With Intel Optane
System Acceleration" from AHCI mode. DO NOT change your SATA controller mode back to AHCI. Doing
so will cause the Optane memory unable to function properly.)
™
4. If you want to accelerate the system drive, you can select specific folders, files, or applications to accelerate
using the Intel Optane Memory Pinning function. (The Intel
® ™
32 GB capacity.)
A-2: Installation in Intel RST Premium With Intel Optane System Acceleration mode
If the SATA controller has been configured in Intel RST Premium With Intel Optane System Acceleration mode,
please follow the steps below:
1. After system restarts, go to the BIOS Setup, make sure CSM Support under the Boot menu is disabled.
2. Go to Settings\IO Ports\SATA And RST Configuration and make sure Use RST Legacy OROM is disabled
and RST Control PCIe Storage Devices is set to Manual. If you want to enable the Optane
in the M2M_SB connector, set PCIe Storage Device on Port 21 to RST Controlled.
3. Enter the operating system, launch the Intel
Memory on the Intel
enable Intel Optane
® ™
4. Launch the Intel Rapid Storage Technology utility from the Start menu and make sure the Intel
®
Memory has been enabled. If you want to accelerate the system drive, you can select specific folders, files, or
applications to accelerate using the Intel
used must have at least 32 GB capacity.)
• An Optane memory cannot be used to accelerate an M.2 PCIe SSD.
™
• Do not abruptly remove the Optane
functioning correctly.
• If you want to change/remove the Optane
Storage Technology or Intel(R) Optane
• After enabling the Optane
(Note) If the system already has Intel
before installing the Intel(R) Optane(TM) Memory System Acceleration application.
Memory application from the Start menu and make sure the Intel
Rapid Storage Technology utility from the Start menu, and then
®
Optane Memory screen.
® ™
Optane Memory Pinning function. (The Intel
® ™
memory. Doing so will cause the operating system to stop
™
memory, you must disable it using the Intel
™
Memory application first.
™
memory, the related BIOS settings will remain even after a BIOS update.
™
Rapid Storage Technology utility installed, you have to remove it first
®
- 42 -
to install. Follow the on-screen
(Note)
memory will be
™
Optane memory used must have at least
® ™
memory installed
™
Optane
®
Optane
® ™
Optane
® ™
memory
™
Rapid
®