Gigabyte H410M S2 User Manual page 11

RJ-45 LAN Port
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following
describes the states of the LAN port LEDs.
Connection/
Connection/Speed LED:
Speed LED Activity LED
State
Orange
Green
Off
LAN Port
Line In/Rear Speaker Out (Blue)
The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.
Line Out/Front Speaker Out (Green)
The line out jack. Use this audio jack for a headphone or 2-channel speaker.
Mic In/Center/Subwoofer Speaker Out (Pink)
The Mic in jack.
Audio Jack Configurations:
Jack
Line In/Rear Speaker Out
Line Out/Front Speaker Out
Mic In/Center/Subwoofer Speaker Out
Front Panel Line Out/Side Speaker Out
• The integrated HD (High Definition) audio provides jack retasking capability that allows the
user to change the function for each jack through the audio driver.
• To configure 7.1-channel audio, you need to open the audio software and select Device
advanced settings > Playback Device to change the default setting first.
Please visit GIGABYTE's website for details on configuring the audio software.
Activity LED:
Description
State
1 Gbps data rate
Blinking
100 Mbps data rate
Off
10 Mbps data rate
Headphone/
4-channel
2-channel
a
a a
- 11 -
Description
Data transmission or receiving is occurring
No data transmission or receiving is occurring
5.1-channel 7.1-channel
a a
a a
a a
a