Contents Overview............................Work area safety.......................... Electric safety..........................Personal safety..........................Power tool use and care......................Service/Additional safety rules......................Symbols............................Operation............................Troubleshooting & Maintenance....................Speci cations..........................Warranty............................. CALIFORNIA PROP 65 WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.
F. Sanding pad G. Sandpaper punch Please read before returning this product for any reason: If you have question or experience a problem with your Hyper Tough purchase, call 1-800-840-7856 from 8:00 a.m. to 8:00 p.m. Eastern Standard Time, Monday through Friday.
2.0Amp 1/4 Sheet Sander Workplace/Electrical Safety SAVE THESE WARNINGS AND INSTRUCTIONS YOU MAY NEED TO REFER TO THEM LATER The term “power tool” in the WARNING refers to your AC power (corded) power tool or battery-operated (cordless) power tool. SAVE THESE INSTRUCTIONS WORK AREA SAFETY 1.
2.0Amp 1/4 Sheet Sander Personal safety/Power tool use and care PERSONAL SAFETY 1. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the in uence of drugs, alcohol or medication.
2.0Amp 1/4 Sheet Sander Additional safety rules storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. 4. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
2.0Amp 1/4 Sheet Sander Additional safety rules particularly if you’re working on a ladder or sca old, high o the ground. If tools with large battery packs can stand upright, but they’re easily tipped over, which could cause result in an injury. 4.
Page 8
Symbols 3. There must not be objects, such as utility lines, nearby that will present a hazard while working. INSTALLING SANDPAPER WARNING: Unplug the sander before replacing sandpaper. NOTE: The sander comes complete with a clip style mounting system. 1. Use the sandpaper punch tool (included) to make holes in your sandpaper that perfectly match the sanding pad.
2.0Amp 1/4 Sheet Sander Operation OPERATION 1. Identify the item you wish to sand or polish and choose the proper grit sandpaper or abrasive pad best suited for the job. If preparing wood for painting or removing paint, use a course grit sanding sheet. Use a ne grit for nishing work.
2.0Amp 1/4 Sheet Sander Troubleshooting & Maintenance TROUBLESHOOTING Problem Possible Causes Likely Solutions Tool will not • Internal damage or wear. • Have technician service tool. start. • • Tool operates Forcing tool to work too Allow tool to work at its own rate. slowly.
WARNING: Only use recommended accessories; Use of unauthorized accessories can be hazardous and/or result in injury or damage. This product is not intended for commercial use. SPECIFICATIONS • Product model: AQ20019G . Rated voltage: 120 Volts AC, 60Hz . Rated current: 2.0A .
Need help?
Do you have a question about the AQ20019G and is the answer not in the manual?
Questions and answers