Cisco Meraki MR42 Installation Manual page 14

Then adjust the MR42 to guide the MR42's bottom slot into the cradle's bottom tab until it clicks into place. Once in place, the MR42 should be secured to the
cradle by using one of the included screws in the cradle's bottom tab.
To release the MR42 from the mount cradle, first remove the security screw that secures the MR42 to the cradle's bottom tab. While holding the MR42 with one
hand, press the cradle's bottom tab upwards, releasing the MR42 from the bottom of the cradle. Then remove the MR42 from the cradle's top tab.
Desk or Shelf Mount
The MR42 can be placed on a desk or shelf resting on the non-scratch rubber feet. The mount cradle is not necessary for a desk or shelf installation.
Secure the MR42
Depending on your mounting environment, you may want to secure the MR42 to its mount location. Your MR42 can be secured in several ways. If the MR42 has
been installed using the mount cradle, it should be secured via security screw (Torx security screws are included) and/or Kensington lock. If the mount cradle
was not used, the MR42 can still be secured using a Kensington lock.
14